HPD Front Mount Intercooler Kit FOR Ford Ranger PK 3LT Automatic
This HPD intercooler kit has been designed and created to suit Ford Ranger PK / PJ early models (2006-2011). The intercooler delivers reduced inlet temperature’s and engine running temperatures. The kit allows fitment of a winch and bull bar and re-positions the intercooler into a higher position that is less likely to suffer damage when off-roading. We also have a transmission cooler upgrade available for automatic transmissions.
NOTE: If your vehicle is Automatic we suggest you order the automatic transmission variant of this kit below as you will have to fabricate new mounting brackets for your existing transmission cooler as the new HPD intercooler will move to a higher location and will interfere with the factory mounting location of the factory transmission cooler.
This Ford Ranger 3.0L intercooler kit responds well with engine tuning. With the cooler intake temperatures produced from HPD's intercooler kit enables a safe increase in torque and power.
Kit features:
- Bar & Plate Core 450x300x76mm
- Alloy mandrel bent piping
- Quality silicone hoses and clamps
- Laser cut Mounting brackets
- Winch & bull bar Compatible*
- Hot side piping 51mmø
- Cold side piping 57mmø
- Transmission cooler upgrade available for automatic transmission
- Transmission cooler 400x110x50mm
- Bolt on installation, no cutting holes for intercooler piping.
(NOTE: small modification will be made to factory bonnet latch support bracket)
Details
HPD 4WD intercooler kits are designed to give amazing performance, reliability, consistent and sustainable power. By reducing inlet temperatures you will also reduce engine running temperatures.
The comprehensive kit has been manufactured with careful research and development. Each kit is vehicle specific with a heat exchanger, alloy mandrel bent piping, quality silicone hoses and fittings.
Our Intercooler Kits are easy to install with basic workshop tools and backed by the HPD team who can help you at any step of the way. With our dealer network Australia wide, you guys that don’t like to get your hands dirty can have your kit installed by a qualified technician. Our front mounted intercoolers don’t suffer from heat soak from high under bonnet temperatures like top mounted intercoolers or water to air intercoolers which at low speed - hard slogging can increase inlet temperatures.
HPD intercooler kits suit all the leading aftermarket turbo kits that don’t have an option for intercooling, allowing you to increase the performance, reliability and fuel efficiency of your 4WD.
*compatible with most aftermarket brands
Additional Information
| Mount | Front Mount Intercooler |
|---|---|
| Make | Ford |
| Model | Ranger PK 3LT |
| SKU | IK-FR-F |
This HPD intercooler kit has been designed and created to suit Ford Ranger PK / PJ early models (2006-2011). The intercooler delivers reduced inlet temperature’s and engine running temperatures. The kit allows fitment of a winch and bull bar and re-positions the intercooler into a higher position that is less likely to suffer damage when off-roading. We also have a transmission cooler upgrade available for automatic transmissions.
NOTE: If your vehicle is Automatic we suggest you order the automatic transmission variant of this kit below as you will have to fabricate new mounting brackets for your existing transmission cooler as the new HPD intercooler will move to a higher location and will interfere with the factory mounting location of the factory transmission cooler.
This Ford Ranger 3.0L intercooler kit responds well with engine tuning. With the cooler intake temperatures produced from HPD's intercooler kit enables a safe increase in torque and power.
Kit features:
- Bar & Plate Core 450x300x76mm
- Alloy mandrel bent piping
- Quality silicone hoses and clamps
- Laser cut Mounting brackets
- Winch & bull bar Compatible*
- Hot side piping 51mmø
- Cold side piping 57mmø
- Transmission cooler upgrade available for automatic transmission
- Transmission cooler 400x110x50mm
- Bolt on installation, no cutting holes for intercooler piping.
(NOTE: small modification will be made to factory bonnet latch support bracket)
Details
HPD 4WD intercooler kits are designed to give amazing performance, reliability, consistent and sustainable power. By reducing inlet temperatures you will also reduce engine running temperatures.
The comprehensive kit has been manufactured with careful research and development. Each kit is vehicle specific with a heat exchanger, alloy mandrel bent piping, quality silicone hoses and fittings.
Our Intercooler Kits are easy to install with basic workshop tools and backed by the HPD team who can help you at any step of the way. With our dealer network Australia wide, you guys that don’t like to get your hands dirty can have your kit installed by a qualified technician. Our front mounted intercoolers don’t suffer from heat soak from high under bonnet temperatures like top mounted intercoolers or water to air intercoolers which at low speed - hard slogging can increase inlet temperatures.
HPD intercooler kits suit all the leading aftermarket turbo kits that don’t have an option for intercooling, allowing you to increase the performance, reliability and fuel efficiency of your 4WD.
*compatible with most aftermarket brands
Additional Information
| Mount | Front Mount Intercooler |
|---|---|
| Make | Ford |
| Model | Ranger PK 3LT |
| SKU | IK-FR-F |
IMPORTANT NOTES FOR BUYERS:
*WE CURRENTLY CARRY MOST OF THE ITEMS IN STOCK BUT SOME MAY BE OUT OF STOCK. PLEASE CONTACT US FOR STOCK AVAILABILITY BEFORE PLACING AN ORDER. A 10% HANDLING FEE WILL BE CHARGED FOR "AFTERPAY" PAYMENT REFUND IF WE ARE NOT CONTACTED BEFOREHAND
*ETA FOR HPD PRODUCTS IS 8-10 WEEKS
*SOME PRODUCTS MAY BE SHIPPED FROM OVERSEAS IF OUT OF STOCK. HANDLING TIME IN THIS CIRCUMSTANCE WILL BE 5-10 DAYS PLUS SHIPPING TIME
*SOME PART NUMBERS ARE MADE TO ORDER. HANDLING TIME WILL BE 2-3 WEEKS
*EXTRA SHIPPING CHARGE MAY APPLY IF BUYERS FROM SA / NT / TAS / WA + REMOTE AREAS
